Custom Injection Molded Plastic PP Precision 7" x 7" For Bushing
1. The part name: bushing (plastic injection mold)
2. Plastic material: PP
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity
condition to decide it with saving cost for our customers.
5. Gate type: Cold runner to SUB gate according to our customers
6. Mold base standard: LKM Local standard, DME or HASCO,Customize
according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI,
Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS,
MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres,
NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO
JIS standard, PUNCH etc according to our customers requires.
bushing (plastic injection mold)
3.mould base material
H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344,
1.2083, 1.2311, 1.2739, 1.2343, 1.2510,
1000k shots or according to customers quantity condition to decide
it with saving cost for our customers.
Cold runner to SUB gate according to our customers requires.
10. mould base standard
LKM Local standard, DME or HASCO,Customize according to customers'
12. standard of mold accessories
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE,
HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM,
EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard,
BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to
our customers requires.
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc.
14. File Formats
Auto CAD (DWG), DXF, JPG or JEPG, PDF, Pro-E or
Pro/Engineer(DRW,PRT), IGES, STEP,XTL,UG parts etc.
15. injection molding machine
About 60T plastic injection machine
T/T, To be negotiated
Wooden case or Wooden box with steel frame
19. delivery time(day)
40 T1 according to customers' requirements
20. OEM or ODM
21. mould logo
Based on customer requires
22. after-sales service
one year is warranties
Molding the plastic product by plastic injection machine
1-SHINY Mold is a professional Complex injection mold maker and
supplier in China. We have accumulated much experience in this
field. We have cooperated with many companies domestic and
overseas. And we have gained much good reputation from our clients.
2-SHINY can make mold according to the standard showed below, for
example, LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive,
ETC, we have many world class supplier to meet our mold requires,
for example, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE,
Parker, HPS, AHP Merkle, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK,
ASSAB, GSW DIN standard, BOHLER, AISI, DAIDO JIS standard, PUNCH
etc. We can complete reach the customer’s requirement because of
the excellent skills, experienced design capability and software,(
for example Auto CAD,UG, Pro/E ,Solid Works, Mold flow etc)complete
procession equipment, strict quality control system.
3- SHINY has widely served in the field of plastic injection mold,
die casting mold, precision plastic mold, double-color mold with
more than 10-years experience for auto parts, home appliance,
electronic, pipe connector, gear, fitness equipment, medical
treatments. Aluminum alloy, zinc alloy and magnesium alloy products
4- Software and Hardware well equipped. For example, high speed CNC
with 2µm high-precision, CMM with 1µm high-precision, slow Wire Cut
Machine with SODICK, Mirror EDM with SODICK, Milling and Precision
Grinder machine with 2µm high-precision, at the same time, we also
install these software like Auto CAD,UG, Pro/E ,Solid Works, Mold
5- We offer advanced R$D service and best engineer to our
customers, DFM and Mold Flow Analysis.
6- High quality, competitive price, on time delivery and excellent
7- Patient communication, during the design, we know customer’s all
side requests trough deeper communication.
8- Series service of design, prototyping, painting, silk-printing
and assembly ( 2 assembly lines for finished products)
9-SHINY uphold the quality first, the user-oriented management
philosophy and dedication to customer service, SHINY MOLD
management introduction is showed below.
Mold construction description: Cold runner system, 2 plates, this
product is very thin wall thickness only 0.2mm, the mold have
0.02mm concentricity requires for these holes, Many size tolerances
are no more than +/-0.02mm,so that is a very precise mold.
The part name: bushing
Mold type: plastic injection mold
Part Material: PP
Locating ring Dimension: Ф3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: ejection pin.
This part has very high appearance requirements, the defect showed
below will not be acceptable, for example, weld line, Dark
Sport,Sliver Marks,Gas Trap Effect,Visible Ejector
Marks,Deformation,Short shot Filling,Burnt Streaks,Sink
Marks,Flash,Over dimension,Under dimension,Stress Crack etc.
Moreover, the product finishing surface must meet the requires more
than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported
to USA, with complicated structures and high quality requests.
Customer needs mold life to be over 1 million shots. We can ensure
this mold life and give warrant to our customer that once some
mould components are broken during working, if it is caused not by
the operation fault from the workers, we can provide new mould
components to them free of charge.
Review on the mold structure and processing technic:
1. Mold preliminary review: According to customer requirements to
making the mold specification table, and determining the mold
parting line, the slider or lifter structure, mold insert type,
ejector type, cooling water method and plastic product issue by the
design director, project director and deputy general manager. The
design engineer makes the DFM report according to the mold
preliminary report, drawing 2D mold structure drawing or 3D
2. Review before cutting steel: When the custom confirms the mold
trial date, project engineer must arrange the mold Kick off meeting
immediately. After that, on the same date, design engineer must
complete the drawings needed to modify and book bulk raw materials
such as mold base and cavity insert. The meeting mainly review mold
runner system, the parting line, ejection mechanism, cooling water
system, mold component strength and whether to meet customer
requirements and standards etc.
3.processing technic review: mainly review manufacturing processing
and assembling processing, the 3D mold drawing details, see whether
mold parts processing is too difficult, whether can ensure the
quality requirements, if manufacturing processing and assembling
processing is economical , if mold clearance, part number and
standard is in accordance with the requirements of the company to
SHINY MOLD management introduction
In order to ensure mold quality, complete customer mold in time and
make processing technic and mold structure more reasonable in mold
design and manufacture, The company added various review in various
stages of mold design and manufacturing, at the same time, we also
check everybody on work schedule, work quality, workload, etc,
which will greatly mobilize the enthusiasm of the staff work.
1. Making mold progress schedule and evaluation based on standard
2. Making everybody workload based on standard man-hour quota.
3. Work quality evaluation, design and manufacture of abnormal
reward and punishment based on our QC record.